info@aokai.net.cn
English
NEWS AND EVENTS
  • Precautions for installing the new ptfe filter bag
    2023-05-15
    1. The installation and use of dust collector cloth bag must be completed after the installation of dust collector, including heat preservation and anticorrosive operations, and the first thing is to remove the spray pipe before installing and using dust collector cloth bag;2. In order to avoid dama
  • How is the dust collector filter bag corroded
    2023-05-10
    Corrosion is one of the common reasons for the damage of dust removal filter bag. The flue gas contains a variety of corrosive substances. In high temperature environment, the corrosion effect is great, and the filter bag is damaged. The main causes of corrosion are hydrolysis, oxidation and acid-ba
  • The function and principle analysis of dust filter bags
    2023-05-05
    1. Attention should be paid to prevent deformation in the lifting of pulse bag dust collector. When the equipment leaves the factory, the key components are welded with lifting lugs, which should be used for lifting.2. After installation of pulse bag type dust collector box, bag room, inlet and outl
  • Maintenance of normal temperature dust filter bag
    2023-05-04
    Selection and maintenance of normal temperature dust filter bagIn order to better play the role of normal temperature dust filter bag, appropriate filter materials should be selected, and the daily maintenance of equipment should be strengthened.First of all, the selection of filter materials. Suita
  • Dust Filter bag replacement cycle and method
    2023-04-25
    Dust bag is a very important part of dust removal equipment, which is used to filter particles in the air and keep the environment clean. At the same time, due to the different use time, the dust bag will gradually wear and age, which affects its filtering effect and needs to be replaced. So, how lo
  • When should you change your dust filter bags
    2023-04-19
    When should the dust collector bag be replacedThe time to replace the dust collector bag mainly depends on the degree of wear and blockage of the filter bag. If the dust layer formed on the surface of the filter bag is too thick, it will lead to the increase of gas flow resistance, thus reducing the
  • Total 77 pages  Go to Page
  • Go

Category

Tel: +86 523 8050 6316
Mob: +86 185 5269 6052
Email: info@aokai.net.cn
Address: 80 Kangzhuang Road, Chengbei Industrial Park, JingJiang, JiangSu Province, China
© 2020 Jiangsu Aokai Environmental Technology Co., Ltd. All rights reserved. Support By Leadong.