The professional dust removal bag for asphalt mixing station needs to have the following characteristics:1. Excellent temperature resistance: It can be operated continuously at a temperature of 204°C (instantaneous temperature of 240°C), and can withstand repeated 240°C instantaneous shaking tempera

If your bag filter has smoke or dust, it should be stopped immediately for maintenance.There are two types of smoke and dust at the air outlet of the bag filter: one is continuous smoke from the smoke outlet, this is because the dust filter bag is seriously damaged, the dust bag buckle plate is not

1. Surface galvanized treatment : choose galvanized, which can prevent rust and oxidation, is cheap, and has a thin coating. Due to strict environmental protection requirements, galvanizing has gradually been replaced by galvanized wire treatment.2. Pure epoxy resin powder coating: choose pure epoxy

1. Measure the diameter of the dust filter, the outer diameter should be smaller than the inner diameter of the dust bag.2. The spacing between the ring beam of the dust removal frame is 200, which is basically finalized.3. The total length of the dust removal skeleton is about 5 cm less than the du

1. Flue gas with high moisture content The dust removal bag operates at high temperature. When the moisture content of the dust in the flue gas exceeds 25%, the dust will cause the dust bag to stick to the bag, paste the bag, and harden. Some dust filter materials that are not resistant to hydrolysi

The corrosion of bag filter cloth is often caused by three kinds of gases. We have summarized the following three gases that can cause the corrosion of dust bag. 1. Strong oxidant: For example, when the PPS dust bag is working at 160 °C, when the oxygen content exceeds the standard (>12%), a large a