1. When to replace the filter bag?There are two ways to determine when to replace the filter bag in practical applications:1) Roughly determine the replacement time based on experience.2) Pressure gauges are installed on the inlet and outlet pipes of the bag filter. The time to replace the filter ba

The ptfe membrane filter bag is a new type of filter material formed by compounding a layer of polytetrafluoroethylene (PTFE) plastic film on the surface of the general filter material. This layer of plastic film is equivalent to having the function of a "primary dust layer". The exchange of raw mat

1. Burning: The main reason for the burning of the dust collector bag is that the initial layer thickness on the surface of the dust collector bag is not enough, and the temperature of the flue gas is too high. If the temperature of the flue gas treated by the dust collector for a long time exceeds

How many years can the dust bag generally be used?The specific service life of the dust bag should be calculated according to the operating conditions and the selected material.From the perspective of filter bag life, the expected service life of the filter bag of the electric bag combination dust c

Features of pps filter bag:1. The pps filter bag refers to the strip-shaped yarn branch with conductive function woven in the pps filter material fiber or base cloth, so that the entire PPS filter material has conductive properties. During use, electricity is guided to the dust collector box and the

1.2 Select according to filter material characteristics1.2.1 PolyesterPolyester filter materials are usually used in low temperature occasions, and usually do not need to be coated. Only when the emission requirement is less than 30 mg/Nm3, or when the dust is very fine and the humidity is high, the