Before the first use, and within 48 hours before being put into use after a long-term shutdown, it is necessary to carry out pre-coating treatment. The so-called pre-coating is to add a filter aid to the dust-facing surface of the dust filter bag to make it more perfect for dust removal and purifica

Such problems will occur in the use of the dust bag, and these problems will affect the normal operation of the bag filter as a whole. It is understood that the factors that are prone to problems with dust removal bags:1. Product quality: The quality processing of dust bag products is particularly i

As the heart of the bag filter, its daily maintenance and maintenance is very important to prolong the life of the bag filter. Due to the initial layer, damage or improper assembly of the dust bag, the dust emission will exceed the standard. Therefore, when we do daily maintenance, we need to pay at

What should be done and what measures should be taken by the dust filter bag when dealing with high-temperature and high-humidity dust has always been a matter of continuous research and improvement by environmental protection manufacturers. Skill. The high temperature and high humidity dust we enco

Ordinary dust removal bags are made of needle-punched felt, woven cloth, cotton and linen fibers, etc. Due to the large gap of the filter material itself at the initial stage of use, part of the smaller dust will directly pass through the gap and be discharged through the exhaust port. When collecti

1. The medium of the bag filter gas to cool the high temperature flue gas can be air or water with a low temperature, and some cool air and water cooling can occur. Whether it is cold air or water cooling, it can be directly cooled or indirectly cooled. These are the cold air that can assist the flu