info@aokai.net.cn
NEWS AND EVENTS
  • The characteristic of Fiberglass Dust Filter Bags
    2021-06-16
    1. High insulation: Glass fiber can withstand high temperatures, has good mechanical properties, and has high chemical stability, making it a good insulating material.2. Good resilience: The glass fiber contains numerous fixed air pockets and has good resilience. Not afraid of any shock and vibratio
  • How to slove the leaks of boiler dust collector
    2021-06-15
    The boiler dust collector consists of an upper box body, a middle box body, a lower box body, an ash discharge device, a blowing ash cleaning system, a bypass flue, a valve, a platform escalator, a protection device, an automatic water spray cooling system, a pre-coating system, Compressed air stora
  • How to extend the use life of air dust filter bags
    2021-06-11
    Extend the dust bag life matters needing attention.1) The old cloth bag should not be mixed with the new process to avoid the normal work of dust removal equipment affected by different damage time.2) the aging of the cloth bag, mainly due to the following reasons, must be investigated, take measure
  • Dust filter bag replacement
    2021-06-10
    The dust collector bag is gradually worn. The main cause of wear is the grinding force of dust, the deterioration of the filter material caused by high temperature and the corrosion of chemical substances. When the grinding force of dust is strong, the bottom of the bag wears the most serious, and t
  • The influence of moisture content on air filter bag
    2021-06-08
    For bag filter, the influence of moisture content is reflected in three aspects:1. Condensation: After the dust-containing gas enters the dust collector, the temperature will drop. If the temperature in the dust collector drops below the dew point corresponding to the moisture content, the water wil
  • Precautions for trial operation of bag filter
    2021-06-07
    During trial operation of the bag filter, special attention should be paid to the main points of inspection: 1. The rotation direction, speed, bearing vibration and temperature of the fan.2. Whether the processing air volume and the pressure and temperature of each test point are consistent with the
  • Total 77 pages  Go to Page
  • Go

Category

Tel: +86 523 8050 6316
Mob: +86 185 5269 6052
Email: info@aokai.net.cn
Address: 80 Kangzhuang Road, Chengbei Industrial Park, JingJiang, JiangSu Province, China