Dust Filter bag replacement cycle and method

Publish Time: 2023-04-25     Origin: Site

Dust Filter bag is a very important part of dust removal equipment, which is used to filter particles in the air and keep the environment clean. At the same time, due to the different use time, the dust filter bag will gradually wear and age, which affects its filtering effect and needs to be replaced. So, how long to replace the dust filter bag and what is the replacement method?

I, how long to replace the dust filter bag

The replacement time of dust bag depends on different factors, including:

1 Dust Filter bag material: according to the material of the bag, the replacement time of some cloth bags can be extended to 1-2 years, such as polytetrafluoroethylene (PTFE) cloth bag; Fabrics that age easily, such as polyester fabric bags, need to be replaced more frequently.

2. Ambient temperature: under high temperature environment, filter bag are easier to age, so the replacement time should be shortened accordingly. Similarly, low temperature environment will prolong the service life of cloth bags.

3. Working load: According to the amount of dust produced in the workshop and the opening time of the equipment, decide the filter bag replacement cycle.

In general, it is recommended that dust filter bag be inspected once a year to assess their use and decide on replacement.

II, Dust Filter bag replacement method

1. Stop the system: When replacing the dust filter bag, all operations related to the system must be stopped, all conveyor belts, conveying pipes and air pipes must be closed, and the power supply of the system must be disconnected.

2. Air compression: The use of air compressor, through the compressed air to remove the dust on the bag, if necessary can also be cleaned with a soft brush.

3. Disassemble the equipment: When disassembling the filter bag of the dust collector, it is necessary to operate according to the safety regulations of the equipment to avoid safety accidents caused by physical strength or operation mistakes.

4. Replace the cloth bag: take off the old cloth bag, and then put the new cloth bag back according to the requirements of the equipment manufacturer. During the replacement process, make sure that the filter bag is properly installed into its chamber. If the fabric connection is found to be broken and worn, it should also be repaired and replaced in time.

5. Assemble the equipment: After the replacement, reassemble the dust collector equipment to ensure its normal operation.

To sum up, dust removal bag is a very important part of dust removal equipment, its filtering effect is directly related to the efficiency of the entire dust removal system, so when replacing dust removal bag, we must take good safety measures, pay attention to the operation specifications, and ensure that the quality of the cloth bag supporting the equipment is excellent and reliable, through scientific maintenance, timely replacement, improve the overall performance of the equipment, Ensure work efficiency and quality.


CONTACT US

High temperature resistant dust filter bags for chemical plants

Application of PTFE Dust filter bag

Dust filter bag resistant to temperature

Application of PTFE dust filter bag

High Temperature Dust Filter Bags