How to cool down your baghouse dust bag filter?

1. The medium of the bag filter gas to cool the high temperature flue gas can be air or water with a low temperature, and some cool air and water cooling can occur. Whether it is cold air or water cooling, it can be directly cooled or indirectly cooled. These are the cold air that can assist the flue gas. The cooling, then the drop duster is warm.

       A wide range of cooling methods are available, all characterized by dust collectors with different temperatures and uses.

       2. Some low-temperature flue gas can be added appropriately. If the temperature of the gas is inconsistent in the same dust removal system, the best way is to first add a part of the low-temperature gas to the high temperature, so that the cold-air mixture can be continuously added. Keep the temperature in the dust collector from getting too high.

       3. There is another way for the dust collector to cool down, that is to install a cold air valve. The suction cooling valve after installing the cold air valve can be used before the bag filter to prevent high flue gas from exceeding the specified temperature and enter the bag filter. , The cold air valve is a butterfly valve with adjustment function, one end is connected with the high temperature pipeline, and the other end is connected with the outside atmosphere. The regulating valve is operated with an automatic high temperature signal to control the amount of air sucked into the flue system, so that the temperature of the flue gas is lowered and adjusted within the range.

       The above is what the bag filter manufacturer introduced to you. Regarding the cooling method of the bag filter, I hope our introduction can be helpful to you. If you want to know more about the bag filter, you can browse our website. The services we will provide you.