Industry news
- Protection measures for dust bag filter1. Avoid the dust bag of the bag filter from being harmed by oil mistFor example, the coal-fired boiler industry will put fuel oil when starting the bag filter and reducing the load to operate the bag filter. At this time, there is a large amount of oil mist in the flue gas of the bag filter, whichIndustry news August 22, 2022
- The reason why the dust filter bag is corrodedCorrosion is one of the most common reasons for the damage of the bag filter. Since the flue gas contains a variety of corrosive substances, and the corrosion effect is greater in the high temperature environment, the filter bag will be damaged.The dust bag can be said to be the heart of the dust coIndustry news August 19, 2022
- The relationship between filter bags and filter cages1. The performance relationship between the dust filter bag and the dust filter cages It is necessary to be reasonable when choosing dust filter bags and dust filter cages. The selection is based on the cooperation between the dust removal skeleton and the dust removal bag filter material. In orderIndustry news August 18, 2022
- Advantages of PTFE membrane dust filter bagThe general deep filtration material is transformed into surface filtration through the film, and the dust is trapped on the surface of the filter material and cannot enter the inside of the filter material, so that the general filter material has a qualitative leap. The main advantages of the PTFE-Industry news August 17, 2022
- Storage measures for high temperature dust filter bags1. Cover the openingThe collector will be transported to the jobsite or factory with all openings fully sealed and fastened together as closely as possible. Usually, the opening will be covered with plywood, plastic. If the dust collector needs to be moved, make sure all of these covers should remaiIndustry news August 15, 2022
- The benefits of pre-coating dust collector filter bagsApplying a precoat can extend the life of the filter bag and protect the filter bag from clogging. Due to the high melting point of the precoat, it also resists harmful sparks when used as a control layer.In summary, the primary benefits of using our precoats in dust collector bags include:1. EnhancIndustry news August 12, 2022
- How to extend the service life of dust filter bags1. Select the appropriate filter material1. The selection of filter material should be based on the temperature and chemical characteristics of the gas; the size, weight, shape of the particles, whether there is pecking or not, and the dust concentration, filtration speed, cleaning method, emissionIndustry news August 11, 2022
- Reasons for dew condensation in the boiler filter bags1. There is air leakage in the bag filter of the boiler. Due to the phenomenon of air leakage in the dust collector, a large amount of cold air from the outside is sucked into the dust collector, so that the local air temperature of the bag filter drops sharply, and the water in the air is analyzed,Industry news August 10, 2022
- How many years can the dust filter bags be used?The specific service life of the dust bag should be calculated according to the operating conditions and the selected material.From the perspective of filter bag life, the expected service life of the filter bag of the electric bag combination dust collector should be higher than that of the pure clIndustry news August 08, 2022
- What are the characteristics of PPS dust filter bagPPS dust bag, also known as polyphenylene sulfide fiber bag, its physical fiber physical properties are significantly better than the original products on the market. PPS dust filter bags have complete strength retention and inherent chemical resistance, which can maintain good filtration performancIndustry news August 05, 2022