Industry news

• Low efficiency of dust filter bag

  Bag filter is a relatively mature product in the market at present, and the production of bag filter manufacturers technology is uneven, some manufacturers due to the immature technology, many manufacturers produced by the bag filter dust removal efficiency and can not achieve satisfactory results.F

  Industry news August 10, 2021
• What causes corrosion of PTFE Dust filter bags?

  Corrosion is one of the most common reasons for bag filter damage. Because the flue gas contains a variety of corrosive substances, the corrosive effect is greater in a high temperature environment, and the filter bag will be damaged. The dust bag can be said to be the heart of the vacuum cleaner. T

  Industry news August 09, 2021
• Analysis of the causes of dust filter bag damage

  The upper mouth of the dust bag is damaged. Reasons: the compressed air is too high; the blowing pipe is skewed; the flower plate is deformed and other reasons. It is an installation quality problem. Phenomenon: The mouth is blown within 30-40 cm (from the bottom to the outside). The dust bag bo

  Industry news August 06, 2021
• Reasons affecting the service life of filter bags

  1) Selection of filter bag: The filter bag should be made of wear-resistant and high-temperature resistant materials, such as glass fiber cloth/felt, NOMEX, needle felt, P84 needle felt, etc., taking into account the wear resistance of the filter bag, durable high temperature and For cost and other

  Industry news August 05, 2021
• The working conditionsof Fiberglass dust filter bags?

  Flumes filter bags are suitable for high temperature, strong acid and alkali, strong corrosiveness, high temperature fine dust filtration and valuable metal material recovery, high adhesion or high humidity working conditions, and uncoated filter materials. It is mainly used in cement rotary kiln he

  Industry news August 04, 2021
• Calculation method of filter area of bag filter

  1. Calculation method of filter area of bag filter: Knowing that the boiler flue gas volume is Q(m^3/h) and the filtering wind speed is v(m/min), the required filter area S(m^2) of the bag filter can be calculatedNamely: S=Q/(60*v) For example: filter area=air volume/(60*filter wind speed).Exa

  Industry news August 03, 2021
• Filter bag failure and treatment method

  1. The filter bag is blocked Cause Analysis: (1) Air leakage or low flue gas temperature causes condensation, pipe leakage, and wet bags cause dust adhesion. (2) The filtering speed is too high, the dust is too fine or too coarse, the dust is sticky, and the filter bag is not cleaned proper

  Industry news August 02, 2021
• The main performance of pulse dust collector bag filter

  1. High-reliability design to ensure long-term stable operation of the dust collector with the host, with minimal maintenance.　　2. High applicability design, the dust collector can adapt to a wide range of fluctuations in the nature of dust-containing gas, and can be adapted non-standard design acco

  Industry news July 30, 2021
• What is the function of high temperature dust filter bag?

  What is the function of the high temperature dust bag?The dust bag is called the heart of the bag filter. It is generally called the dust bag and the dust filter bag. The dust bag is an important part of the bag filter in operation. Usually, the cylindrical filter bag is hung vertically on the dust

  Industry news July 29, 2021
• How to the use the pulse dust bag filter

  1. The dust filter bag needs to be overhauled and replaced in time, and it is best to replace the filter bag in a batch, otherwise it will cause uneven filter load, which will make the newly replaced filter bag bear the filter load due to the lower resistance, resulting in the service life of the ne

  Industry news July 28, 2021