Industry news

• Air permeability and resistance of dust filter bag

  The air permeability and resistance of the dust collector bag are introduced as follows:　　 Air permeability refers to the amount of gas passing through the filter material per unit area under a certain pressure difference. The resistance of the filter material of the dust collector is directly relat

  Industry news July 06, 2021
• Technical requirements for dust filter bags in power plants

  1 The material selection and processing method of the filter material of the power plant dust removal filter bag should fully consider the operating conditions of the coal-fired boiler and the requirements of the flue gas characteristics to ensure the safe and reliable operation of the filter bag du

  Industry news July 02, 2021
• Asphalt Plant Dust Filter Bags

  Flue gas characteristics of asphalt flue gas system(1) The main flue gas is the flue gas after the burning of heavy oil or diesel, and the dust, moisture and asphalt flue gas in the drying process of sand and stone.(2) Due to the large dust particles at the air outlet, a first-stage inertial dust re

  Industry news July 01, 2021
• Air Dust Filter Bag Types and Applications

  Aokai Envirotec filter bags are always made according to the requirements of your dedusting equipment. It ensures the close fit of the filter bag and the tube sheet to prevent the dust from leaking from the tube sheet hole. Our filter bags are made from high quality filter cloth. Production procedur

  Industry news June 30, 2021
• The influence for the installation of the dust collector on the filter bag

  The structure design of the dust collector and the quality and tolerance of construction and installation will directly affect the dust removal efficiency and the service life of the filter bag, mainly including:

  Industry news June 29, 2021
• Precautions for maintenance of dust collector filter bag

  Precautions for maintenance of dust collector and filter bag

  Industry news June 28, 2021
• The turned on and stopped of dust collector bag filter

  Start the dust collector

  Industry news June 25, 2021
• Installation of filter bag cage

  Before the cage is put into the filter bag, it must be strictly checked for deformation, burrs, desoldering, bending, etc. The bag cage with quality problems cannot be used

  Industry news June 24, 2021
• Powder Test Leakage For air dust filter bags

  Powder Test Leakage For air dust filter bags

  Industry news June 23, 2021
• Pre-coating operating instructions for Dust Filter Bags

  Pre-coating preparation: Before pre-coating operation, the pre-coating powder should be prepared. Generally, powdered hydrated lime [Ca(OH)2] is used to pre-coat the filter bag, and the recommended usage amount is 0.25kg /m2, evenly distributed to each cabin;

  Industry news June 22, 2021