The place to pay attention to when replacing your air filter bag

1. The single-section dust filter bag cage generally has space for bag replacement. First, take out the dust filter bag cage  together with the dust removal filter bag, and use a knife or other tools to remove the dust removal filter bag attached to the dust filter bag cage . (Do not damage the dust removal skeleton)

2. Multi-section dust filter bag cage  structure, the dust filter bag cage can be split after the dust filter bag is cut at the joint, and then moved to the open area to remove the dust filter bag.

3. In the filter bag device of the dust collector, it must be ensured that the size of the dust filter bag is the same as the size of the device. The imperfect processing of the bag filter is also the place where the dust bag is prone to problems. After the dust filter bag is installed, the mouth of the dust filter bag is tightly sealed, and it is difficult for the hand to roll.

When the dust-laden gas passes through the dust collector, the dust is collected on the outer surface of the filter bag, and the clean gas will enter the filter bag through the filter material. The cage inside the filter bag is used to support the filter bag and prevent the filter bag from falling, and it also helps the removal and re-distribution of the dust cake. When choosing a dust filter bag, you must choose a suitable dust filter bag, because a suitable filter bag can not only make the dust collector more efficient, but also make the bag last longer.

Dust filter bag and cages are widely used in steel, cement, chemical industry, power plants, road construction, metallurgy, food processing and so on.