Because the flue gas temperature is lower than the dew point or the source dust moisture content is high, resulting in dust in the filter bag surface can not be normal dust, this is our bag dust industry often appear in the problem - "paste bag". If the dust stuck on the surface of the filter bag ca

The dust bag is an important part of the dust removal efficiency of the bag filter, and the cost of changing the bag is the maintenance cost of the bag filter, so the service life of the filter bag is related to the operation form and cost of the dust collector.Chongxin dust removal Equipment Co., L

First, burning: the reason for the burning of the dust collector cloth bag is mainly that the initial layer thickness of the dust bag surface is not enough, and the temperature of the flue gas is too high. If the dust collector long-term treatment of the flue gas temperature exceeds the working cond

The bag length is too long will cause the lower part of the filter bag wear, especially the bag bottom up within 100㎜, mainly dust bag length more than the bag cage length of more than 30㎜, the filter bag in the filter shrinkage is too large, the filter bag bottom up 100㎜, and the bottom of the bag

At present, dust bag manufacturers are prone to a lot of situations. Therefore, it is necessary to check in time before use. Only in this way can we directly find the problems in the dust bag manufacturer, and only after finding these problems can we solve them directly.When we use dust bags, we wil

Environmental protection bag dust removalExcessive dust emissionThe basic reasons for the excessive dust emission: 1. The initial layer on the surface of the filter bag is not enough; 2. The filter bag is damaged; 3. The filter bag is poorly assembled; they are described as follows:1. The initial la