Precoat is a dry, chemically inert, non-toxic, and easy-to-use powder that can be used to wrap or condition filter bags in baghouses to improve filtration efficiency and effectiveness. Think of it as forming a uniform, three-dimensional, porous assist or enhancer in the baghouse.The precoat has a na

1. The effect of high temperature on the filter bagWhen the exhaust gas temperature exceeds 160 ℃, the temperature has a significant impact on the life of the filter bag. As the temperature increases, the life of the filter bag will gradually increase. When the temperature reaches a certain temperat

1. Avoid the dust bag of the bag filter from being harmed by oil mistFor example, the coal-fired boiler industry will put fuel oil when starting the bag filter and reducing the load to operate the bag filter. At this time, there is a large amount of oil mist in the flue gas of the bag filter, which

Corrosion is one of the most common reasons for the damage of the bag filter. Since the flue gas contains a variety of corrosive substances, and the corrosion effect is greater in the high temperature environment, the filter bag will be damaged.The dust bag can be said to be the heart of the dust co

1. The performance relationship between the dust filter bag and the dust filter cages It is necessary to be reasonable when choosing dust filter bags and dust filter cages. The selection is based on the cooperation between the dust removal skeleton and the dust removal bag filter material. In order

The general deep filtration material is transformed into surface filtration through the film, and the dust is trapped on the surface of the filter material and cannot enter the inside of the filter material, so that the general filter material has a qualitative leap. The main advantages of the PTFE-