info@aokai.net.cn
NEWS AND EVENTS
  • Reasons for dust collector filter bag aging
    2021-11-10
    In the bag filter, the dust filter bag is often prone to blockage, damage, and aging. The dust bag will reduce the dust removal efficiency, increase the maintenance cost of the dust collector, and even damage the bag filter for users. Bring economic burden.When the filter bag is clogged, the resista
  • Asphalt mixing plant Aramid Dust Filter Bags
    2021-11-09
    Asphalt mixing plant Metas dust bag is mostly used in various high temperature flue gas filtering occasions. It has excellent performance. It is a kind of high temperature resistant dust collector filter bag variety, especially suitable for the flue gas dust removal of asphalt mixing plant. Generall
  • Advantages of PTFE air dust filter bag
    2021-11-08
    I. Advantages of ptfe filter bag1. Good dust removal effectThe dust removal effect of using ptfe filter bag is very good. It is mainly used by combining the film and needle felt through the process of thermal film coating, so its surface will appear very smooth, and the filter rate effect is also ve
  • Reasons for the damage of the air dust filter bag
    2021-11-05
    Either improper installation or improper operation will cause damage to the filter bag. There are several reasons for damage:1 Filter wind speedIn the design of the dust collector, if the filter wind speed is too high, it is easy to increase the running resistance and frequent dust removal, which wi
  • Working temperature of air dust filter bags
    2021-11-03
    Dust collection bag (dust collection bag, dust collection bag, dust collection filter bag, dust collection filter bag) is a bag-shaped filter bag made of non-woven fabric or woven fabric material through seam or heat fusion, which is used for filtering, collecting dust and collecting material. One o
  • Different Air Dust Filter Cloth Application
    2021-11-01
    Filter ClottemperatureFilter material performance and adapt to working conditionsCommon industries and working conditionsPolypropylene (PP)900CIt is suitable for working conditions where the continuous temperature is less than 900C and the instantaneous temperature does not exceed 1000C, the oxidati
  • Total 79 pages  Go to Page
  • Go

Category

Tel: +86 523 8050 6316
Mob: +86 185 5269 6052
Email: info@aokai.net.cn
Address: 80 Kangzhuang Road, Chengbei Industrial Park, JingJiang, JiangSu Province, China