The dust filter bag cage is the main accessory of the bag filter, commonly known as the rib of the bag. Its quality directly affects the filter status and service life of the bag filter and the dust removal effect of the bag filter. Use a high-frequency welding machine to weld the skeleton forming a

How to choose dust bag according to air volumeProcessing air volume ÷ filter wind speed = filter area, generally the dust bag filter wind speed is about 0.8-1.2/sec1: The average speed of the flue gas before entering the bag filter X the cross-sectional area of the bag filter inlet. It should be not

1. There should be sufficient strength, rigidity, verticality and dimensional accuracy to prevent deformation under compression, damage during transportation, contact with each other after the filter bags are placed in the dust collector, difficulty in bagging, and friction between the bag frame and

The dust removal effect is not good, the emission dust concentration exceeds the standard, the outlet is ash, and the dust emission is large. The reasons can be found from the following aspects:(1) The newly installed clean filter bag has large pores, and the dust passing rate is high when it is fir

The use of bag filter has already been used in different industries, but after a period of use, it is easy to malfunction, so we need to pay attention to the maintenance and repair of the above content. Let us introduce in detail how long the maintenance cycle of bag filter is generally What?The bag

How to replace the pps dust filter bag manufacturer when it is used for blast furnace gas?1. Before installation, employees who perform replacement work must understand the key points of the filter bag dust removal process, and then the construction process of removing the dust filter bag, and then