1. Affect the stability of the kiln system: For the dust removal equipment operated by negative pressure, a large amount of air can be poured into the air leakage, and the effective air volume of the kiln system drawn by the tail exhaust fan is reduced, which affects the output of the kiln.2. Dust l

1. The bolts of the exhaust hood of the bag filter are loose and cause vibration.2. Poor pipe support of bag filter; poor hose material causes resonance; pipe resonance;3. Insufficient strength causes vibration; the body of the bag filter will resonate at the same frequency as the airflow vibration;

As the working condition of the bag filter reaches high temperature, the bag hardening and shrinking phenomenon of the high temperature resistant Flumes dust collector occurs;Due to the working conditions of the bag filter, there are acid, alkali, organic solvent steam or oxide contact reaction, whi

The bag dust collector has poor dust removal during use, which causes the dust collector to fail to operate normally and to remove dust.Reason 1: The dust filter bag of the bag filter is too tight. Solution: Adjust the tension of the dust filter bag to relax the filter bag.Reason 2: The dust filter

Main reasons and elimination methods:1) The differential pressure reading is wrong: clean the pressure measuring interface/check the trachea for cracks/check the differential pressure gauge.2) The injection system setting is incorrect: increase the injection frequency/compressed air pressure is too

1. Exhaust the high temperature gas from the dust removal box and introduce the outside air to keep the temperature in balance with the outside. The moisture condensation in the filter bag room is caused by the water vapor in the dusty flue gas and the gas generated by combustion. Therefore, the wet