The cleaning method of the bag filter is the primary condition for the selection of dust bag varieties. It can firstly determine whether the dust removal filter material is woven cloth, needled felt, compression felt or dust removal cloth bag (glass fiber filter bag). As for the specific specificati

A. The number of vertical ribs of the skeleton should be reasonably matched according to the raw materials of the filter material, and the lubrication should be flat without blemishes, with sufficient strength, straightness up to the industry standard, and good coordination with the filter bag.B. Th

1. When storing the dust bag, it should be kept away from fire sources, moisture-proof, avoid direct sunlight, and prevent heavy objects from being squeezed. Check each filter bag before installation to prevent mechanical damage.2. The installers should dress smartly, their pockets should be emptied

When designing the bag filter, increasing the filtering wind speed will not cause any obvious response from users in a short period of time, but greatly shorten the service life of the filter bag. So, how to prolong the service life of the dust filter bag?1. Select the appropriate filter materialThe

1.2 Select according to filter material characteristics1.2.1 PolyesterPolyester filter materials are usually used in low temperature occasions, and usually do not need to be coated. Only when the emission requirement is less than 30 mg/Nm3, or when the dust is very fine and the humidity is high, the

Well-designed structureThe structure of the filter bag should meet the requirements of filtration and dust removal of the matching bag filter, and it should be easy to install and reliable in sealing. The corresponding filtering area and good filtering state should be pursued. Reasonable coordinatio