In order to prolong the service life and dust removal efficiency of the bag filter, air leakage must be prevented. Here are two effective methods to prevent air leakage:Strengthen the seal(1) Strengthen the sealing of the dust removal system: To prevent air leakage, it is also necessary to strengthe

After taking the dust filter bag out of the packing box (it must be installed in the hole of the flower plate immediately, you cannot take the dust-removing cloth bag out and place it aside) according to the following steps:1. Hold the open end of the dust removal bag with your hand while keeping th

When the bag filter is stopped for a long time, pay attention to the equipment to prevent moisture, pay attention to the moisture in the filter bag room, and prevent the filter bag from being hydrolyzed and corroded by moisture.1. Exhaust the high temperature gas from the dust removal box and introd

The air permeability and resistance of the dust collector bag are introduced as follows:　　 Air permeability refers to the amount of gas passing through the filter material per unit area under a certain pressure difference. The resistance of the filter material of the dust collector is directly relat

The dust collector bag is gradually worn. The main cause of wear is the grinding force of dust, the deterioration of the filter material caused by high temperature and the corrosion of chemical substances. When the grinding force of dust is strong, the bottom of the bag wears the most serious, and t

The dust bag is an important part of the bag filter in operation, and the cylindrical filter bag is usually hung vertically in the dust collector. The longitudinal stitches of the dust bag must be strong and not less than three straight. The loop stitches at the mouth of the dust bag must be strong,