Step 1 Wear and tear1.1 Uneven air distributionThe uneven distribution of air flow causes the dust gas to scour the part of the filter bag at high speed, which makes the local wear of the filter bag and reduces the service life.Preventive measures: To improve the uniformity of the air distribution o

1. Burning and pressing treatment: the surface of the dust removal filter bag after this treatment will have incomparable advantages of ordinary burning and pressing treatment, which not only improves the dust removal performance of the dust removal filter bag, but also strengthens the collection of

Type of dust filter bag:1. According to the shape of cross section of dust filter bag, it can be divided into flat bag (trapezoidal and flat) and round bag (cylindrical).2. According to the air inlet and outlet mode, it can be divided into downward air inlet and upward air outlet, upward air outlet

When the bag dust collector runs for a long time and the ash discharging device is not maintained in place or fails, the dust hopper of the dust collector will accumulate a large amount of ash. Then a large amount of ash accumulates on the bag dust collector in two aspects:On the one hand, it affect

Asphalt mixing equipment is to connect each relatively independent unit to form a system with the main mixer as the center. These units mainly include: cold silo unit, drying drum, burner, hot aggregate elevator, vibrating screen, metering system, mixing cylinder, finished silo, asphalt heating syst

1. Before the installation of the filter bag, it is necessary to remove the sundries on the air chamber and flower plate, and then remove all installation remnants in the box and ash hopper, such as lifting lugs, tools, small parts, welding rods, welding slag, etc.2. In addition to the size of the c