A. The number of vertical ribs of the skeleton should be reasonably matched according to the material of the filter material, and it should be smooth and flat without blemishes, with sufficient strength, verticality up to the industry standard, and good coordination with the filter bag.B. The flower

1. Improper installation of the filter bag of the dust collector: A. The installation process is chaotic, and the storage of the bag cage and the filter bag is irregular, which causes the filter bag or the bag cage to be squeezed and deformed; B. The filter bag is not vertical, which will cause the

Filter wind speedThe high filtration wind speed of the bag filter is the main reason for the damage of the dust bag. In recent years, some units have consciously reduced equipment costs and increased profits. When designing the baghouse, they increased the filtration air velocity. The user has no ob

After the dust bag is used for a long time, more and more dust is deposited on the surface, and the dust removal efficiency will decrease. Now what are the steps of the cleaning method of the dust bag, here is an introduction for you.Cleaning of dust bag: choose appropriate detergent and strictly pr

Because the blockage of the dust bag is likely to lead to aggravation of the aging of the dust bag, of course, if the dust bag is blocked, it will not only lead to aggravated aging of the dust bag, but also lead to a series of other problems.When the dust bag is blocked, the biggest reaction is that

1. Processing air volume (Q): The processing air volume refers to the volume of gas that the dust removal equipment can purify per unit time. The unit is cubic meters per hour (m3/h) or standard cubic meters per hour (Nm3/h) and is one of the most important factors in baghouse design.When designing