Because the flue gas temperature is lower than the dew point or the source dust moisture content is high, resulting in dust in the filter bag surface can not be normal dust, this is our bag dust industry often appear in the problem - "paste bag". If the dust stuck on the surface of the filter bag ca

The bag length is too long will cause the lower part of the filter bag wear, especially the bag bottom up within 100㎜, mainly dust bag length more than the bag cage length of more than 30㎜, the filter bag in the filter shrinkage is too large, the filter bag bottom up 100㎜, and the bottom of the bag

At present, dust bag manufacturers are prone to a lot of situations. Therefore, it is necessary to check in time before use. Only in this way can we directly find the problems in the dust bag manufacturer, and only after finding these problems can we solve them directly.When we use dust bags, we wil

Asphalt mixer dust bag fluorescent powder leak detection is generally carried out after the filter bag is newly installed, or when the smoke and dust discharge exceeds the standard, to detect whether there are leaks and ensure that the discharge meets the standard. If the inspected dust collector is

he fabric design of the normal temperature dust collector bag should try to pursue high-efficiency filtration, easy dust stripping and durable effects. The dust filter bag is an important accessory in the dust collector. The bag filter generally selects the required dust bag according to the nature

1. Burning: The main reason for the burning of the dust collector bag is that the initial layer thickness on the surface of the dust collector bag is not enough, and the temperature of the flue gas is too high. If the temperature of the flue gas treated by the dust collector for a long time exceeds