Dust filter bag cage manufacturing problem1. Cage dust filter requires the support ring and longitudinal reinforcement to be evenly distributed, and there should be satisfactory strength and stiffness, which can accept the gas pressure of filter bag in the filtration and ash removal condition, and c

1 Necessary conditions for the installation of the bag filter cage1.1 Due to long-distance transportation and multiple loading and unloading, the bag cage should be checked for defects such as de-soldering, bending deformation, and silicone spraying peeling before installation. The bag cage with the

1. Measure the diameter of the dust filter, the outer diameter should be smaller than the inner diameter of the dust bag.2. The spacing between the ring beam of the dust removal frame is 200, which is basically finalized.3. The total length of the dust removal skeleton is about 5 cm less than the du

(1) The influence of the size of the dust removal skeleton: In the geometric size of the dust removal bag cage, the diameter of the dust removal skeleton, the gas inlet, and the shape and size of the exhaust pipe are the important influencing factors. The standard scale can achieve the best dust rem

The dust removal frame is a key part of the bag filter operation process. Usually the cylindrical filter bag is vertically hung on the dust collector. The dust removal frame is the rib of the filter bag. It should be lightweight, easy to install and maintain, and directly affect the quality. The fil

1. There should be sufficient strength, rigidity, verticality and dimensional accuracy to prevent deformation under compression, damage during transportation, contact with each other after the filter bags are placed in the dust collector, difficulty in bagging, and friction between the bag frame and