info@aokai.net.cn
English
NEWS AND EVENTS
  • Comparison of high temperature and mechanical damage for filter bags
    2021-01-15
    1. Causes and phenomena of high temperature damage to the dust filter bag.Open flame sparks. Reason: There is sparks in the smoke, causing small holes to burn. Phenomenon: There are small holes on the dust bag.High temperature flue gas. Reason: The temperature of the working condition of the cloth b
  • How to clean oily dust filter bag
    2021-01-14
    1. When washing the dust filter bag, the first step is to clean the dust. Use high-frequency triggering to remove the larger dust particles entering the wall of the dust filter bag. The strength should be controlled so that the fiber entanglement fastness cannot be produced. The limitation of the in
  • Analysis of air leakage of kiln bag filter in cement plant
    2021-01-11
    1. Affect the stability of the kiln system: For the dust removal equipment operated by negative pressure, a large amount of air can be poured into the air leakage, and the effective air volume of the kiln system drawn by the tail exhaust fan is reduced, which affects the output of the kiln.2. Dust l
  • Reasons for serious noise and vibration of bag filter in operation
    2021-01-06
    1. The bolts of the exhaust hood of the bag filter are loose and cause vibration.2. Poor pipe support of bag filter; poor hose material causes resonance; pipe resonance;3. Insufficient strength causes vibration; the body of the bag filter will resonate at the same frequency as the airflow vibration;
  • Reasons for premature aging of fiberglass dust filter bags
    2020-12-31
    As the working condition of the bag filter reaches high temperature, the bag hardening and shrinking phenomenon of the high temperature resistant Flumes dust collector occurs;Due to the working conditions of the bag filter, there are acid, alkali, organic solvent steam or oxide contact reaction, whi
  • The reason of dust collector has a large amount of dust
    2020-12-30
    The bag dust collector has poor dust removal during use, which causes the dust collector to fail to operate normally and to remove dust.Reason 1: The dust filter bag of the bag filter is too tight. Solution: Adjust the tension of the dust filter bag to relax the filter bag.Reason 2: The dust filter
  • Total 77 pages  Go to Page
  • Go

Category

Tel: +86 523 8050 6316
Mob: +86 185 5269 6052
Email: info@aokai.net.cn
Address: 80 Kangzhuang Road, Chengbei Industrial Park, JingJiang, JiangSu Province, China
© 2020 Jiangsu Aokai Environmental Technology Co., Ltd. All rights reserved. Support By Leadong.