Main reasons and elimination methods:1) The differential pressure reading is wrong: clean the pressure measuring interface/check the trachea for cracks/check the differential pressure gauge.2) The injection system setting is incorrect: increase the injection frequency/compressed air pressure is too

1. Exhaust the high temperature gas from the dust removal box and introduce the outside air to keep the temperature in balance with the outside. The moisture condensation in the filter bag room is caused by the water vapor in the dusty flue gas and the gas generated by combustion. Therefore, the wet

Working principle of dust bagThe dust bag has only one control room. If the back-blowing method is used to clean the dust, the dust removal effect will be worse during back-blowing. The large bag filter has multiple filter control rooms, which are controlled by the program, so that each control room

Acrylic dust filter bag is a new type of high temperature resistant filter material. It not only has the advantages of high temperature resistance, erosion resistance and non-deformation of glass fiber fabric, but also the three-dimensional microporous structure of felt layer fiber, which has high p

The Features of PTFE Dust Filter Bags

Good temperature resistance. Melting point is 285℃, continuous use temperature is 160℃, instant use temperature is 190℃.2. Excellent corrosion resistance. Polyphenylene sulfide fiber is superior to Nomex Conex fiber in terms of resistance to organic acid, inorganic acid, acid and oxidant.3. Good fl