Industry news

• Dust filter bag cage measurement methods

  1. Measure the diameter of the dust filter, the outer diameter should be smaller than the inner diameter of the dust bag.2. The spacing between the ring beam of the dust removal frame is 200, which is basically finalized.3. The total length of the dust removal skeleton is about 5 cm less than the du

  Industry news July 01, 2022
• Which flue gas is easy to corrode the filter bag cages

  1. Flue gas with high moisture content The dust removal bag operates at high temperature. When the moisture content of the dust in the flue gas exceeds 25%, the dust will cause the dust bag to stick to the bag, paste the bag, and harden. Some dust filter materials that are not resistant to hydrolysi

  Industry news June 30, 2022
• Which gases will cause the air filter bags to corrode?

  The corrosion of bag filter cloth is often caused by three kinds of gases. We have summarized the following three gases that can cause the corrosion of dust bag. 1. Strong oxidant: For example, when the PPS dust bag is working at 160 °C, when the oxygen content exceeds the standard (>12%), a large a

  Industry news June 29, 2022
• Measures to reduce the resistance of air dust bag filter

  1. Reasonably determine the filter wind speedThe resistance of the bag filter depends to a large extent on the filtering wind speed. The resistance of the dust collector structure, cleaning filter bag and dust layer all increase with the increase of the filtering wind speed. No matter what kind of f

  Industry news June 24, 2022
• Advantages of membrane air dust filter bags

  What are the advantages of various dust removal bags in use?The film coating process is based on ordinary filter material, and the surface is covered with a special film that makes the filtration more precise, so that the dust removal efficiency of the dust bag is higher and the service life is long

  Industry news June 23, 2022
• The solution to the condensation of the pulse dust bag filter

  1. Reduce the air leakage phenomenon of the dust collector(1) During the production and installation of the dust collector, the welding standard of JC/T532 should be strictly implemented to prevent the phenomenon of less welding and missing welding of the dust collector.(2) The discharge port of the

  Industry news June 22, 2022
• Causes of condensation in pulse dust bag filter

  1. There is air leakage in the dust collectorDue to the phenomenon of air leakage in the dust collector, a large amount of cold air from the outside is sucked into the dust collector, so that the local air temperature of the dust collector drops sharply, and the water in the air is analyzed, resulti

  Industry news June 21, 2022
• How to reduce the moisture content of flue gas in dust bag filter

  he moisture content in the dusty flue gas is an important factor affecting the resistance of the bag filter. The increase in relative humidity of dusty flue gas will increase the resistance of the dust bag. The adhesion between the dust and the surface of the dust bag is affected by the relative hum

  Industry news June 20, 2022
• The place to pay attention to when replacing your air filter bag

  1. The single-section dust removal skeleton generally has space for bag replacement. First, take out the dust removal skeleton together with the dust removal cloth bag, and use a knife or other tools to remove the dust removal cloth bag attached to the dust removal skeleton. (Do not damage the dust

  Industry news June 17, 2022
• Dust filter bags according to the cleaning method

  The cleaning method of the bag filter is the primary condition for the selection of dust bag varieties. It can firstly determine whether the dust removal filter material is woven cloth, needled felt, compression felt or dust removal cloth bag (glass fiber filter bag). As for the specific specificati

  Industry news June 16, 2022