Industry news
- Solutions for air dust filter bag wear, burnout and corrosionDamaged filter bag(Wear, Burn, Corrosion) The use of filter bags accounts for the largest maintenance cost of the dust collector, up to more than 70% of the maintenance cost. The basic conditions are wear, burn, corrosion, etc. The solution can be in the following ways:(1) WearExcessive filtering aiIndustry news September 22, 2022
- Dust filter bag and bag cage installation1 Necessary conditions for the installation of the bag filter cage1.1 Due to long-distance transportation and multiple loading and unloading, the bag cage should be checked for defects such as de-soldering, bending deformation, and silicone spraying peeling before installation. The bag cage with theIndustry news September 21, 2022
- 7 Steps to the Correct Selection of Dust Collector Filter Bags7 steps to choose a dust collector suitable for your working conditions:The first step: master the dust removal conditions and determine the physical and chemical properties of the smoke and dustFirst of all, it is necessary to understand the composition of the dust-containing gas, as well as the teIndustry news September 20, 2022
- Secification of Air Dust Collector filter BagsClassification of dust collector bags:1. Normal temperature dust collector bag: The normal temperature bag is mainly made of polyester, polypropylene, acrylic and other fibers through non-woven and textile processes. It has good air permeability, smooth surface, good dimensional stability, easy to pIndustry news September 19, 2022
- The difference between on-line cleaning and off-line cleaning of dust bag filterIndustrial dust bag1. On-line cleaning of bag filterThe high-pressure pulsed air is ejected from the pulse solenoid valve through the air delivery pipe at a high speed from the injection hole above the center of the filter bag, and penetrates the neck of the Venturi tube above the filter bag, includIndustry news September 15, 2022
- The difference from membrane dust filter bagsThe film-coated dust filter bag is a layer of polytetrafluoroethylene film compounded on the surface of the ordinary dust filter bag filter material. The surface is smooth and resistant to various chemical substances. It can play the role of waterproof, oil-proof and anti-static. effect. Therefore,Industry news September 14, 2022
- Leak detection operation of phosphor powder in asphalt filter bagAsphalt mixer dust bag fluorescent powder leak detection is generally carried out after the filter bag is newly installed, or when the smoke and dust discharge exceeds the standard, to detect whether there are leaks and ensure that the discharge meets the standard. If the inspected dust collector isIndustry news September 13, 2022
- PPS needle felt filter bags characteristicsPPS dust filter bag filter material needle felt material is an excellent high temperature resistant filter material. PPS needle felt filter media has the following characteristics:1. The continuous working temperature can reach 190℃, and the instantaneous temperature is 220℃.2. It can be used when tIndustry news September 12, 2022
- Points to consider when choosing a dust filter baghe fabric design of the normal temperature dust collector bag should try to pursue high-efficiency filtration, easy dust stripping and durable effects. The dust filter bag is an important accessory in the dust collector. The bag filter generally selects the required dust bag according to the natureIndustry news September 09, 2022
- Advantages of PTFE membrane filter bagsPolytetrafluoroethylene (PTFE) is commonly known as "the king of plastics". Its special molecular structure makes it invulnerable to all poisons (it will not change when boiled in aqua regia). It can work for a long time at -190~250 °C and is widely used. In environmental protection, sealing, aerospIndustry news September 08, 2022