Article List
- Subjective causes of dust filter bag damageThe dust bag is an important part of the dust removal efficiency of the bag filter, and the cost of changing the bag is the maintenance cost of the bag filter, so the service life of the filter bag is related to the operation form and cost of the dust collector.Chongxin dust removal Equipment Co., LIndustry news October 10, 2022
- The main faults of dust filter bags and the ways to avoid themFirst, burning: the reason for the burning of the dust collector cloth bag is mainly that the initial layer thickness of the dust bag surface is not enough, and the temperature of the flue gas is too high. If the dust collector long-term treatment of the flue gas temperature exceeds the working condIndustry news October 09, 2022
- Dust filter bag production attentionThe bag length is too long will cause the lower part of the filter bag wear, especially the bag bottom up within 100㎜, mainly dust bag length more than the bag cage length of more than 30㎜, the filter bag in the filter shrinkage is too large, the filter bag bottom up 100㎜, and the bottom of the bagIndustry news October 08, 2022
- How to slow down the aging time of dust filter bagAt present, dust bag manufacturers are prone to a lot of situations. Therefore, it is necessary to check in time before use. Only in this way can we directly find the problems in the dust bag manufacturer, and only after finding these problems can we solve them directly.When we use dust bags, we wilIndustry news September 28, 2022
- Causes of excessive dust emission caused by dust filter bagsEnvironmental protection bag dust removalExcessive dust emissionThe basic reasons for the excessive dust emission: 1. The initial layer on the surface of the filter bag is not enough; 2. The filter bag is damaged; 3. The filter bag is poorly assembled; they are described as follows:1. The initial laIndustry news September 23, 2022
- Solutions for air dust filter bag wear, burnout and corrosionDamaged filter bag(Wear, Burn, Corrosion) The use of filter bags accounts for the largest maintenance cost of the dust collector, up to more than 70% of the maintenance cost. The basic conditions are wear, burn, corrosion, etc. The solution can be in the following ways:(1) WearExcessive filtering aiIndustry news September 22, 2022
- Dust filter bag and bag cage installation1 Necessary conditions for the installation of the bag filter cage1.1 Due to long-distance transportation and multiple loading and unloading, the bag cage should be checked for defects such as de-soldering, bending deformation, and silicone spraying peeling before installation. The bag cage with theIndustry news September 21, 2022
- 7 Steps to the Correct Selection of Dust Collector Filter Bags7 steps to choose a dust collector suitable for your working conditions:The first step: master the dust removal conditions and determine the physical and chemical properties of the smoke and dustFirst of all, it is necessary to understand the composition of the dust-containing gas, as well as the teIndustry news September 20, 2022
- Secification of Air Dust Collector filter BagsClassification of dust collector bags:1. Normal temperature dust collector bag: The normal temperature bag is mainly made of polyester, polypropylene, acrylic and other fibers through non-woven and textile processes. It has good air permeability, smooth surface, good dimensional stability, easy to pIndustry news September 19, 2022
- The difference between on-line cleaning and off-line cleaning of dust bag filterIndustrial dust bag1. On-line cleaning of bag filterThe high-pressure pulsed air is ejected from the pulse solenoid valve through the air delivery pipe at a high speed from the injection hole above the center of the filter bag, and penetrates the neck of the Venturi tube above the filter bag, includIndustry news September 15, 2022