Industrial dust bag1. On-line cleaning of bag filterThe high-pressure pulsed air is ejected from the pulse solenoid valve through the air delivery pipe at a high speed from the injection hole above the center of the filter bag, and penetrates the neck of the Venturi tube above the filter bag, includ

he fabric design of the normal temperature dust collector bag should try to pursue high-efficiency filtration, easy dust stripping and durable effects. The dust filter bag is an important accessory in the dust collector. The bag filter generally selects the required dust bag according to the nature

1. Avoid the dust bag of the bag filter from being harmed by oil mistFor example, the coal-fired boiler industry will put fuel oil when starting the bag filter and reducing the load to operate the bag filter. At this time, there is a large amount of oil mist in the flue gas of the bag filter, which

When we used the dust bag, we found that the bag was also damaged. It is very important to replace them in time. It also easily causes the bag to age, which can easily happen in long-term use, and will affect the use of the dust bag.1. Abnormal working condition temperature. If the temperature is to

1. Reasonably determine the filter wind speedThe resistance of the bag filter depends to a large extent on the filtering wind speed. The resistance of the dust collector structure, cleaning filter bag and dust layer all increase with the increase of the filtering wind speed. No matter what kind of f

1. There is air leakage in the dust collectorDue to the phenomenon of air leakage in the dust collector, a large amount of cold air from the outside is sucked into the dust collector, so that the local air temperature of the dust collector drops sharply, and the water in the air is analyzed, resulti