he moisture content in the dusty flue gas is an important factor affecting the resistance of the bag filter. The increase in relative humidity of dusty flue gas will increase the resistance of the dust bag. The adhesion between the dust and the surface of the dust bag is affected by the relative hum

When the bag filter is used to deal with smoke and dust with sparks such as sawdust boilers, rice husk boilers, aluminum regeneration furnaces and smelting furnaces, the burned dust in the furnace may enter the box with the airflow of the air duct, causing the dust accumulated on the dust removal ba

Because the blockage of the dust bag is likely to lead to aggravation of the aging of the dust bag, of course, if the dust bag is blocked, it will not only lead to aggravated aging of the dust bag, but also lead to a series of other problems.When the dust bag is blocked, the biggest reaction is that

1. Processing air volume (Q): The processing air volume refers to the volume of gas that the dust removal equipment can purify per unit time. The unit is cubic meters per hour (m3/h) or standard cubic meters per hour (Nm3/h) and is one of the most important factors in baghouse design.When designing

High temperature flue gas treatment for bag dust removalAmong all the flue gases that need to be treated, a part is the soot with high temperature. Such as high-temperature boiler smoke, various iron-making cupola smoke, some industrial kiln smoke, etc., and even some of the flue gas temperature is

The dust filter bag is the heart of the bag filter and a key part in the operation process of the bag filter. How long it takes to replace the filter bag is a concern of enterprises, because the frequency of replacement of the filter bag is related to the later operation cost. Below, for everyone An